PCTx


Blue and Black PCTx units



The PCTx interface allows you to connect your R/C transmitter to your PC. By connecting an R/C transmitter to a PC via the PCTx interface, you now have the ability to take control of an R/C vehicle or robot with your PC side applications.

Click here to see more about how the PCTx works.

 

Project ideas:

  • Wireless robot controller
  • Pan and Tilt system for a video camera
  • Telepresence robot
  • Bomb disposal robot
  • Control system for a UAV
  • Steering wheel and foot pedal interface to R/C car
  • Industrial automation
  • Animatronics - puppets and effects

See more about example projects here

 


Small package for great portability

 

Features:

  • Generates up to 9 output channels
  • Generate extra channels not supported by the transmitter
  • 50Hz PPM refresh rate
  • Independent channel pulse width control
  • Sample software available
  • Cable Length: 3ft
  • High Resolution Support (1024 steps per channel).


Sample Software:

Please use the following software as a starting point for your own applications. See the software page for more examples.

 

Standard Resolution:

sample application
sample source code

 

High Resolution:

sample application
sample source code


product image
Standard Resolution Sample Application

 

Schematic and Bill of Materials:

Schematic
Bill of Materials

 

Compatibility:

The PCTx is a USB HID device. Windows XP to Windows 10 are compatible. Software is also available for Linux and MacOS, see the software section for details. An R/C transmitter with a trainer port capable of accepting a PPM signal is required. Transmitter modules will work but usually require more work than just plugging in the PCTx.

The PCTx comes with 1 of the following plugs standard. Please see the adapters section if you would like multiple plug styles. Adapters are only available for mono PCTx units.

The PCTx is compatible with most radio brands:

  • Futaba
  • Airtronics
  • JR
  • Spektrum
  • Hitec
  • Tower Hobbies
  • Multiplex
  • ESky

 

Important Note:

If your radio is not listed the PCTx may still work however it is not tested by Endurance R/C. If your transmitter has a trainer port and can accept a PPM signal then the PCTx should be compatible. However due to the number of different buddy port protocols appearing on the market today we cannot guarantee compatibility with all radios. Please be sure to check your radio's manual before ordering to determine if your radio can accept a PPM pulse.

 

Compatible Accessories :

Adapters
Plugs
ServoCommander

 

Instructions:

Click here to view in PDF format

 

PCTx Setup and Help Guide

 

PCTx - $49.99

Plug Type Color
   

High Resolution PCTx - $49.99

Plug Type Color
   

PCTx Replacement Chip- $9.99

   

High Resolution PCTx Replacement Chip- $9.99

© 2023, Endurance R/C